15/17 Suny Jigide Street, By Celestial Way, Ogudu Lagos.
Mon-Fri 08:00 AM - 05:00 PM
With recent studies showing that, on average, most inverters don’t last long as they should, there’s no doubt that something is wrong. The inverter system is a complex electronic system that can be used for both domestic and industrial purposes.
Just like every other electrical device, the solar inverter system needs to be properly installed to function properly. Though a solar inverter system is expected to last for an average of 20 years, this is only achievable with proper maintenance.
Henceforth In this article, we will discuss 6 Tips For Solar Inverter System Maintenance that will help to extend the lifespan of your solar inverter system.
Given below are 6 Tips For Solar Inverter System Maintenance that will help to keep your inverter in its optimum state for a long time:
1. Install your inverter system in the right place
This is the first factor that will determine if your inverter will last for a long period or not.
Where you install your inverter matters a lot. Installing your inverter system in the right location will save you a lot. A good location should have good ventilation, be cool, and be roomy.
The temperature of the inverter system rises during charging and operation, therefore there is a need for cool air to reduce the heat.
Likewise, there should be enough space around the inverter system for adequate airflow and cooling. The system should not be in direct sunlight, near heat, or fire sources.
2. Ensure that the inverter system is installed correctly
Installing your inverter system in the right location is not enough to keep it in good working condition for a long period.
A good piece of equipment that has been improperly placed will either not operate at all or operate inefficiently.
As a result, you need to hire qualified and licensed professionals like Core-Power Limited to assist you with the installation process. Installing the system correctly in cool and ventilated area will make maintenance fairly simple.
3. Avoid overloading the inverter
To ensure that the inverter system lasts as long as possible, it should not be overloaded with electrical appliances that it was not designed to support.
In addition, Loading your inverter beyond its capacity will not only drain the inverter’s battery power faster but can also damage the inverter or cause an electrical fire.
4. Always keep the inverter surface and battery terminals clean
Another way to elongate the lifespan of your inverter system is to ensure that it is free from dust and dirt.
Likewise you can easily clean the inverter surface with a dry cloth. A solution of baking soda and distilled water for the battery terminals. This will help to prevent rust and corrosion.
5. Avoid draining batteries consistently
Allowing your inverter battery to drain completely before recharging will quickly damage your battery’s cells and reduce its lifespan. To avoid this, ensure that you discontinue usage when your batteries are down to a reasonable percentage.
You can reduce power consumption by using energy-saving lighting and turning off unused devices/appliances.
6. Always check for damaged wires and loose connections
Damaged cables and loose connections may reduce battery output, raise the risk of open circuits, short circuits, and cause other dangers.
As a result, you need to regularly check for damaged cables and loose connections, and correct them immediately. Our licensed and qualified professionals at Core-Power Limited can help you fix this.
Frequently Asked Questions
Will tree shade have any effect on my panels?
Yes, a tree shade may obstruct direct sunlight thus, preventing solar panels from producing the required amount of energy. Core-Power Limited advises clients to trim trees obstructing solar panels.
How should I clean my solar battery terminals?
You can clean your solar battery terminals with a solution of distilled water and baking soda using a terminal cleaner brush. After that, rinse the terminals with clean water.
Do I need a stabilizer for my solar inverter system?
No, you don’t need a stabilizer for your solar inverter system. However, if you often experience extreme low voltage or high voltage problems, you need it to stabilize the input voltage.
Conclusion
At Core-Power Limited, we not only advise our clients to take maintenance seriously, but we also advise them to invest in quality solar inverter systems and hire qualified and licensed professionals for the installation.
In case you cannot carry out these maintenance tips yourself or you need a technician to conduct a more detailed test on your inverter, do not hesitate to contact us on +2349130003339. Our skilled team of experts has extensive training in all facets of solar installation and maintenance.
