15/17 Suny Jigide Street, By Celestial Way, Ogudu Lagos.
Mon-Fri 08:00 AM - 05:00 PM
A blocked sink can be a frustrating inconvenience, disrupting your daily routine and leading to unpleasant odors. While severe clogs may require professional help, many blocked sinks can be fixed with simple tools and techniques. Here’s a step-by-step guide to help you address the issue effectively.
Before diving into solutions, confirm that your sink is blocked. Common signs include:
Slow drainage or water pooling.
Foul odors emanating from the drain.
Gurgling sounds when water drains.
Action: Check the sink stopper or plug for accumulated debris like hair, grease, or food particles.
How: Remove the stopper and clean it thoroughly before reinserting.
Why It Works: Boiling water can dissolve minor clogs caused by grease or soap residue.
How: Pour a kettle of boiling water slowly into the drain, waiting a few minutes before testing the drainage.
Action: A sink plunger can create suction to dislodge the blockage.
How:
Fill the sink with enough water to cover the plunger’s cup.
Position the plunger over the drain and pump it up and down vigorously.
Check if the water drains after a few attempts.
Why It Works: The chemical reaction helps break down organic matter causing the clog.
How:
Pour 1 cup of baking soda into the drain.
Follow with 1 cup of white vinegar.
Cover the drain with a plug and let the mixture sit for 15–30 minutes.
Flush with boiling water.
Why It Works: The U-bend or P-trap under the sink often collects debris.
How:
Place a bucket beneath the U-bend to catch water.
Unscrew the U-bend carefully and remove any blockages.
Reassemble and test the drainage.
Action: For stubborn clogs, a drain snake or a straightened wire hanger can help.
How: Insert the tool into the drain and twist to grab and pull out the blockage.
Caution: Use this as a last resort and follow the manufacturer’s instructions carefully. Avoid overuse as it can damage pipes over time.
If none of these steps resolve the issue, the blockage may be severe or located deep within the plumbing system. Contact a licensed plumber to avoid causing further damage.
Avoid pouring grease, coffee grounds, or food scraps down the drain.
Use a drain cover to catch debris.
Regularly flush the sink with boiling water.
Clean the U-bend periodically.
Fixing a blocked sink is often manageable with the right tools and techniques. Regular maintenance and being mindful of what goes down the drain can help you avoid similar issues in the future. If you’re dealing with persistent clogs, don’t hesitate to contact us at Core-Power Limited for expert plumbing services. We’ll ensure your plumbing system runs smoothly!
Phone no: (234) 9130003339 (Office)
